top of page

Rob Rubin Group

Public·8 members

How to Download and Install Motorola GP340 Programming Software



How to Download and Install Motorola GP340 Programming Software




If you own a Motorola GP340 radio, you might want to program it according to your needs and preferences. However, programming a GP340 radio is not as simple as using a USB cable and a software. You will need some additional equipment and software to do it properly. In this article, we will show you how to download and install the Motorola GP340 programming software and how to use it to program your radio.


motorola gp340 programming software download



What You Need to Program a GP340 Radio




Before you start programming your GP340 radio, you will need the following items:


  • A Motorola GP340 radio



  • A Motorola RIB (radio interface) box



  • A Motorola programming cable (either RS232 or USB)



  • A computer with a serial RS232 port or a USB port



  • The Motorola GP340 programming software (ENLN4115)



The RIB box is a device that connects the computer's serial RS232 port and the radio. It acts as a translator between the two devices and provides power to the radio during programming. The programming cable is used to connect the RIB box and the radio. Depending on your computer's port, you can use either an RS232 cable or a USB cable. The programming software is the application that allows you to read and write data to the radio.


How to Download the Motorola GP340 Programming Software




The Motorola GP340 programming software (ENLN4115) is available for purchase from Radiotronics UK[^1^], an official Gold Motorola Value Added Reseller. You can buy it online and download it instantly after payment. The software is compatible with Windows XP, Vista, 7, 8 and 10 operating systems. The software can be used to program the following radios:


  • GP320



  • GP330



  • GP340



  • GP360



  • GP380



  • GP344



  • GP244R



  • GP366R



  • GP388



  • GP388R



  • GP340 Ex



How to Install the Motorola GP340 Programming Software




To install the Motorola GP340 programming software, follow these steps:


  • Download the software from Radiotronics UK[^1^] and save it on your computer.



  • Extract the ZIP file and run the setup.exe file.



  • Follow the instructions on the screen to complete the installation.



  • Restart your computer if prompted.



How to Program a GP340 Radio Using the Software




To program a GP340 radio using the software, follow these steps:


  • Connect the RIB box to your computer's serial RS232 port or use a USB adapter.



  • Connect the programming cable to the RIB box and to your radio.



  • Turn on your radio and make sure it is in good condition.



  • Launch the Motorola GP340 programming software on your computer.



  • Select "Read Data" from the "Program" menu to read the current settings from your radio.



  • Edit the settings as you wish using the tabs and menus on the software.



  • Select "Write Data" from the "Program" menu to write the new settings to your radio.



  • Wait for the process to finish and disconnect your radio from the cable.



Tips and Troubleshooting




Here are some tips and troubleshooting advice for programming your GP340 radio:


  • If you encounter any errors or problems during programming, check your connections, cables, RIB box, power supply, radio battery, software version and compatibility.